POLAR AW200 User Manual
Page 33
To change the battery:
1.
Open the battery cover with a coin by turning it from CLOSE to
OPEN.
2.
Remove the battery cover and lift the battery (CR2032) out
carefully with a suitably sized screwdriver. Be careful not to
damage the metal sound element (a) or the grooves.
3.
Insert a new battery with the positive (+) side outwards.
4.
Replace the old sealing ring with a new one, fitting it snuggly in
the cover groove to ensure water resistance.
5.
Put the cover back on and turn it clockwise to CLOSE.
6.
Re-enter the basic settings. For further information, see the
chapter What to Do First.
It is recommended that the altimeter or barometer is calibrated after
battery replacement.
Keep the batteries away from children. If swallowed, contact a
doctor immediately. Batteries should be disposed of properly
according to local regulations.
E N G L I S H
Customer Service Information 33