Inserting/removing the battery – Panasonic DMC-FX07 User Manual

Page 14

Advertising
background image

Preparation

14

VQT0Y69

Inserting/Removing
the Battery

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the release lever in the

direction of the arrow and open
the card/battery door.

• Always use genuine Panasonic

batteries (CGA-S005A).

2 Insert:

Insert the charged battery fully
being careful about the direction
you insert it.

Remove:
Slide the lock

A to remove the

battery.

3 1 Close the card/battery door.

2 Slide the release lever in the

direction of the arrow.

• Remove the battery after use. Store the

removed battery in the battery carrying
case (supplied).

• When a fully charged battery has been

inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (If you insert a battery that is not
sufficiently charged, the length of time that
the clock setting is stored may become
less.) However, the clock setting is
canceled after this length of time. In this
case, set the clock again. (P18)

• Do not remove the card or the battery

while the card is being accessed. The
data may be damaged. (P16)

• Do not remove the battery until the

LCD monitor and the status indicator
(green) turn off as the settings on the
camera may not be stored properly.

• The supplied battery is designed only

for the camera. Do not use it with any
other equipment.

OPEN LOCK

OPEN LOCK

VQT0Y69ENG.book 14 ページ 2006年6月30日 金曜日 午前11時7分

Advertising