Panasonic DMC-FX07 - Manual (Page 22)

Preparation
22
VQT0Y69
[NO.RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
(P90) the built-in memory (DMC-FX3) or
the card first and then use this function to
reset the file number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
• Refer to P92 for detailed information about
the file number and the folder number.
• The [NO.RESET] setting also affects
simple mode [ ].
[RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
The [REC] or [SETUP] menu settings are
reset to the initial settings.
• The birthday setting for [BABY1]/[BABY2]
(P56) in scene mode, the number of days
that have passed since the departure date
for [TRAVEL DATE] (P58) and the
[WORLD TIME] setting (P60) are also
reset when the [SETUP] menu settings
are reset. Also, [FAVORITE] (P80) is fixed
to [OFF] and [ROTATE DISP.] (P81) is
fixed to [ON].
• The folder number and the clock setting
are not changed.
[USB MODE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied).
[
SELECT ON CONNECTION]:
Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.
[ PC]:
Set after or before connecting to a PC.
[ PictBridge (PTP)]:
Set after or before connecting to a
printer supporting PictBridge.
• When [PC] is selected, the camera is
connected via the “USB Mass Storage”
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via the “PTP (Picture
Transfer Protocol)” communication
system.
[VIDEO OUT]
(Playback mode only) (P98)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
[NTSC]: Video output is set to NTSC
system.
[PAL]: Video output is set to PAL
system.
/SET
MENU
/SET
MENU
/SET
MENU
/SET
MENU
VQT0Y69ENG.book 22 ページ ２００６年６月３０日 金曜日 午前１１時７分