Panasonic KX-TG1837AL - Manual (Page 23)

Base Unit Settings
23
Call options
Selecting area codes to be
deleted automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 24)
will include area codes. If you do not want to
dial the area codes when making calls from
the Caller ID list, you can store the area
codes which you want the unit to delete
automatically.
Example: You have stored the area code
“123”. If you make a call from the Caller ID
list to the phone number “123-456-7890”,
the unit dials “456-7890”.
1
{j
/OK} i “Base Unit Setup” i
{>}
2 “Call Options” i {>}
3 “Area Code” i {>}
4 Enter an area code (5 digits max.). i
{j
/OK} i {ih}
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
1
{j /OK} i “Base Unit Setup” i
{>}
2 “Call Options” i {>}
3 “Call Restrict” i {>}
4 Enter the base unit PIN (default:
“0000”).
L
If you forget your PIN, see page 47.
5 Set which handsets will be restricted by
pressing the desired handset number.
L
All the registered handset numbers
will be displayed.
L
Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L
To turn call restriction off for a handset,
press the number again. The number
will stop flashing.
6
{j
/OK}
7 Select a memory location. i {>}
8 Enter the phone number or area code to
be restricted (8 digits max.). i
{j
/OK} i {ih}
L To erase a restricted number, press
{
C/T}.
TG1831-1837AL(e).book Page 23 Friday, February 3, 2006 2:24 PM