Panasonic KX-TG1837AL - Manual (Page 28)

SMS (Short Message Service)
28
4 Press {^} or {V} to select the message.
i
{j/OK}
5
{j
/OK} i “Edit Message” i {>}
i Continue from step 4, “Writing and
sending a new message”, page 27.
Erasing saved messages
1
{j
/OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i
Enter its password.
3 “Send List” i {>}
4 Press {^} or {V} to select the message.
i
{j/OK}
5
{j /OK} i “Erase” i {>}
L To erase all messages in the selected
mailbox, select “Erase All”. i
{>}
6 “Yes” i {>} i {ih}
Receiving a message
When an SMS message is received:
– a tone is heard (if the handset ringer is
turned on)
– “Receiving SMS Message” is
displayed
– F is displayed
– the message indicator on the handset
flashes if the message alert feature (page
19) has been turned on
Reading a received message
1
{j /OK} i “SMS” i {>}
2 To access the public mailbox
“Public” i {>}
To access a private mailbox
Select the desired mailbox. i {>} i
Enter its password.
L
If a mailbox contains new (unread)
SMS messages, “@” is displayed next
to the total number of messages for
that mailbox.
3 “Receive List” i {>}
4 Press {^} or {V} to select a message.
L
Messages which have already been
read are indicated by a “Q”, even if
they were read using another handset.
5 Press {j/OK} to read the message
content.
Note:
L
To call the message sender, press {C}
or {s}.
Replying to a message
1
While reading a received message,
press {j/OK}.
2 “Reply” i {>}
3 Enter a message (page 42). i
{j
/OK}
4 Edit the destination phone number
and/or press {j/OK}.
5 Continue from step 6, “Writing and
sending a new message”, page 27.
Editing/forwarding a message
1 While reading a received message,
press {j/OK}.
2 “Edit Message” i {>}
3 Continue from step 6, “Writing and
sending a new message”, page 27.
Erasing received messages
1
While reading a received message,
press {j/OK}.
2 “Erase” i {>}
TG1831-1837AL(e).book Page 28 Friday, February 3, 2006 2:24 PM