Planet Technology WPG-110 - Manual (Page 26)

WPG-110 User Manual
4.6 Network Setup
There are many kinds of operating configurations as below:
< Auto-Configuration Network Setup >
The default network setting of the WPG-110 is DHCP client. When the
WPG-110 is connected to a LAN that already has a DHCP server present, the
it obtains an IP address from the server. When the WPG-110 is connected to
a LAN that does not have a DHCP server, it becomes the DHCP server in the
network.
IP Setup
You can select “obtain IP address automatically” or “Use the
following IP address”
♦ IP Address
♦ Subnet Mask
♦ Default Gateway
If you don’t know how to configure, you can ask your computer
administrator or ISP provider.
- - 26