Quick start – Planet Technology WPG-110 User Manual
Page 8
Advertising
WPG-110 User Manual
2. Quick Start
1) Connect the VGA cable of projector to the VGA connector on WPG-110
and power on the projector.
2) Turn on WPG-110.
♦ When Projector shows the default menu on the screen as below, it indicates the
WPG-110 box is ready now.
3) Make sure your PC LAN port or WLAN interface is enabled already, and
connect your PC with WPG-110 box (wireless default SSID is WPG-110).
4) Open your browser and enter the WPG-110 IP address to get in WPG-110
web home page.
-
-
8
Advertising