Polycom KIRK 14117800 - Manual (Page 91)

Configuring KIRK Wireless Server 600v3 91
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 26
Wireless Server 600v3 Multi-cell installation
This section contains information about:
• “Configuring the IP Master (Primary) KIRK Wireless Server 600v3” on page 91
• “Configuring Sync Master” on page 100
• “The Sync Master is now configured.” on page 104
• “” on page 108
• “” on page 117
• “” on page 117
• “” on page 120
7.6.1 Configuring the IP Master (Primary) KIRK Wireless Server 600v3
This section describes how to configure a Master KWS600v3 in a multi-cell solution.
This section includes information about:
• “Entering a System User Name and Password (Primary)” on page 92
• “Assigning a Specific IP Address (Primary)” on page 92
• “Obtaining a Multi-Cell License (Primary)” on page 94
• “Configuring Ethernet Link (Primary)” on page 95
• “Setting LDAP Mode (Primary/LDAP Server)” on page 95
• “Configuring DECT System (Primary)” on page 96
• “Configuring DECT Master (Primary)” on page 97
• “Configuring DECT Radio (Primary)” on page 98
• Configuring TOS (Type of Service) Priorities (Primary) on page 99
For information on accessing the web based Administration Page, refer to “Accessing the
Web Based Administration Page” on page 79 .