Inserting the card – Panasonic DMC-F1PP User Manual

Page 15

Advertising
background image

Preparation

15

Inserting the Card

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is stored.

[Inserting the card]

1

Slide the door in the direction of the
arrow to open the Memory Card/battery
door.

2

Insert the card all the way in until it
clicks.

• Check the direction of the card.
• Do not touch the connection terminals on the

back side of the card.

3

Close the Memory Card/battery door.

[Removing the card]

4

Slide the door to the direction of the
arrow to open the Memory Card/battery
door.

5

Press the card to release.

6

Pull the card out.

7

Close the Memory Card/battery door.

• If you are using a MultiMediaCard type memory

card and the battery card cannot close, the card
may be installed backwards. Remove the card
and reverse it, then try to close the door again.

• If the card cannot be fully inserted, verify whether

the direction of the card is correct.

• We recommend that you use a Panasonic

branded SD Memory Card. (Use only the
genuine card)

• If the card is not fully inserted, the card may be

damaged.

4

1

3,7

2

LOCK

5,6

1,4

Advertising