Panasonic DMC-F1PP - Manual (Page 74)

Technical use
74
Resetting the File Number
As the file numbers are recorded sequentially
by the camera, when you use two or more
cards, it may happen that the file numbers on
your cards do not start from 0001.
Use this function when you insert a new card
or perform the new recording on the recorded
card and you want to start recording from the
file number 0001.
[Preparation]
• Set the mode dial except for [ ]/[ ]. (P22)
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3 / 4 to select [NO.RESET] and
then press 1 .
4 When this message is displayed
“RESET FILE NO. IN THE
CAMERA?”, press
2 / 1 to select
[YES].
5 Press the 4 /[REVIEW/SET] button.
6 Press the [MENU] button.
• The menu will disappear.
1,6 2,3,4,5
SETUP 2/2 REC
RESET
SELECT SET EXIT MENU
CLOCK SET
LANGUAGE ENG
3
NO.RESET
RESET FILE NO.
IN THE CAMERA?
NO.RESET
SELECT SET
YES NO
4