Inserting / removing the card, Inserting/removing the card – Panasonic DMC-FX7PP User Manual

Page 15

Advertising
background image

Preparation

15

Inserting/Removing the Card

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the card/battery door to

open it.

• The card and the data may be

damaged if it is inserted or removed
while the camera is on.

• We recommend using Panasonic’s SD

Memory Card. (Use only the genuine
SD card with SD Logo.)

2 Insert:

Insert the card with the label side
facing the back of the camera
until it clicks.

Remove:
Push the card until it clicks, then
pull the card out upright.

• Check the direction of the card.
• Do not touch the connection terminals

on the back side of the card.

• The card may be damaged if it is not

fully inserted.

3 1 Close the card/battery door.

2 Slide the card/battery door to

the end and then close it firmly.

• If the card/battery door cannot be

completely closed, remove the card and
insert it again.

FX7PP.book 15 ページ 2004年7月30日 金曜日 午前10時37分

Advertising