Setting date / time (clock set), Setting date/time (clock set) – Panasonic DMC-FX7PP User Manual
Page 18
Preparation
18
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• Press the [MENU] button, the screen
shown in step 2 appears.
• The screen disappears in about
5 seconds. To access clock set menu,
start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P20)
2 Set date and time.
•
2/1: Select the desired item.
•
3/4: Set date and time.
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET
MENU
SETUP
2
/
3
SELECT
EXIT
MENU
CLOCK SET
MENU
NO.RESET
RESET
PC
VIDEO OUT
NTSC
USB MODE
M/D/Y
JAN
1
1 2004
.
.
0 00
:
CLOCK SET
EXIT
MENU
SET
SELECT
EXIT
10:00
1
DEC.
1
1.2004
MENU
M/D/Y
CLOCK SET
SET
SELECT
FX7PP.book 18 ページ 2004年7月30日 金曜日 午前10時37分