Panasonic DP-200 - Manual (Page 15)

15
# Place approximately 50
sheets of paper into the tray.
NOTE
ATTENTION
Basic Copy
Using the Sheet Bypass
■ ■ ■ ■ ■
Copying on Special Paper, etc.
1 Place the original.
Open the sheet bypass.
Sheet Bypass
2 Pull out the sheet bypass tray
until it stops.
(For Ledger size only)
3
Insert the paper until it stops.
$ Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Press START.
Side Guides
C Adjust the side guides properly to avoid skewing, wrinkling or misfeeding.
C Do not feed curled paper through the sheet bypass to avoid misfeed.
Do not fill above.
Making Copies