Panasonic DP-200 - Manual (Page 32)

32
NOTE
No. Modes
Initial
Setting
Function
00 PAPER SIZE PRIOR. Specifies the paper size in manual paper size
setting mode. Letter
Function
Copier Settings for Key Operator
ORIGINAL (HOME)
Selects contrast for Text/Photo mode
C 1 ~ 5
T/P CONTRAST 3
PHOTO CONTRAST Selects contrast for Photo mode
C 1 ~ 5
Text/Photo Selects original setting
C Text, Text/Photo, Photo
3 Selects contrast for Text mode
C 1 ~ 5
TEXT CONTRAST
3
MAX. COPY SETTING Determines whether to limit number of copies
C 0 (No limit) ~ 999
0
(No limit)
01
02
03
04
10
11 MULTI-SIZE ROTATE VALID When using the same size paper in Multi-size
feeding mode, select the paper direction by
rotating or not.
C INVALID, VALID
Input a size in memory 2 for frequent usage
size.
C X: 5~432/Y: 5~297 mm
(See P.26)
M2, SIZE 95
×
220 mm
(X) (Y)
70
×
160 mm
(X) (Y)
Input a size in memory 1 for frequent usage
size.
C X: 5~432/Y: 5~297 mm
(See P.26)
M1, SIZE
16 MEM. FULL ACTION Selects the memory full action
C Print, Cancel
Print
COPY OUTPUT TRAY
∗
Sets the stack position for the copied paper.
C Inner 1, Inner 2, Outer
Inner 1
12
13
18
C It is necessary to input the Key Operator ID code before changing items on this page.
∗
Not needed in copying mode, but needed when installing options for advanced
functions (see page 38).