Panasonic SC-HT670 - Manual (Page 14)

RQT7534
14
Before
Before
Before
Before
Before
Before
Disc operations
Discs—Convenient functions
Selecting groups to play
1 Press [GROUP].
Example
2 Press the numbered buttons to select the group and
press [ENTER].
¡ ¡ ¡ ¡ ¡ Playing all the groups in succession ( A Page 15, All group play)
¡ Playing bonus groups
Some discs contain bonus groups. If a password screen appears
after selecting a group, enter the password with the numbered
buttons. Refer also to the disc’s jacket.
Repeat play
(Only when the elapsed play
time can be displayed.)
: Works with all JPEG content.
During play
Press [SHIFT]+[REPEAT].
Each time you press the button:
PG REPEAT → ALL REPEAT (Entire disc) → REPEAT OFF
¡ During play list play
SCENE REPEAT
→ PL REPEAT → REPEAT OFF
CHAPTER REPEAT → TITLE REPEAT → REPEAT OFF
(There is no on-screen display.)
TRACK REPEAT → ALL REPEAT (Entire disc) → REPEAT OFF
TRACK REPEAT
→
GROUP REPEAT
→
REPEAT OFF
(There is no on-screen display.)
CONTENT REPEAT → GROUP REPEAT → REPEAT OFF
(There is no on-screen display.)
GROUP REPEAT
→
REPEAT OFF
During all group ( ), program and random play
“ALL REPEAT” is displayed.
¡ You can also repeat play of content and group on HighMAT discs.
¡ When CD Mode is on, you can only select “ALL RPT” (All Repeat)
and “RPT OFF” (Repeat Off).
L To repeat only your favorite tracks/chapters
Start program play ( A page 15) and press [SHIFT]+[REPEAT] to select
the repeat mode.
A-B repeat play
(Only when the elapsed play time can be displayed.)
(Except still picture part)
You can repeat a section between points A and B within a program,
title or track/content.
1 During play
Press [DISPLAY] ( A page 21).
2 Press [ 8 , 9 ] to select “Other Settings” and press
[ENTER].
3 Press [ 8 , 9 ] to select “Play Menu” and press [ENTER].
Example
4 Press [ 8 , 9 ] to select “A-B Repeat” and
1 1 1 1 1 Press [ENTER] at the starting point (A).
2 2 2 2 2 Press [ENTER] at the finishing point (B).
A-B repeat starts.
To return to normal play
Press [ENTER] again.
To clear the menus
Press [RETURN] until the menus disappear.
Note
A-B repeat is canceled when you press [QUICK REPLAY].
Audio
“ – ”, “– –” or “– – –” is displayed instead of the language number in
circumstances such as when no language is recorded on the disc.
(SVCD only)
Soundtrack and subtitle numbers may change even if corresponding
soundtracks are not recorded.
(Discs with multiple soundtracks)
During play
Press [AUDIO].
The number changes each time you press the button.
Example
¡ You can also use this button to turn the vocals on and off on karaoke
discs. Read the disc’s instructions for details.
¡ Play restarts from the beginning of the soundtrack when changing
soundtracks that are accompanied by still pictures.
¡ Even if a second soundtrack isn’t recorded, two soundtrack numbers
will normally be shown when you press [AUDIO]. The soundtrack
currently playing is number 1.
Signal type/data
LPCM/PPCM/
p Digital/DTS: Signal type
(kHz): Sampling frequency
(bit): Number of bits
(ch): Number of channels
Example:
3/2 .1ch
.1: Low frequency effect
(not displayed if there is no signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Center
2: Front left+Front right
3: Front left+Front right+Center
Menu
Audio L R L R
L
R
Menu
Audio 1(1) 1 LPCM 48kHz 24bit 2ch
2
89; :
ENTER
Numbered
buttons
REPEAT
PLAY MODE
RETURN
: L
AUDIO
SUBTITLE
DISPLAY
CANCEL
DISC 1–
DISC 5
SHIFT
PAGE
GROUP
QUICK REPLAY
→
→
→
→
→
→
→
Menu
Audio 1 1 English p Digital 3/2.1ch
Signal type/data ( A below)
Number of channels
(
A below) Audio language
Menu
Repeat Chapter
A–B Repeat
Marker
* *
Menu
Group Search 2 Group number
RQT7534-3P PC(14) 16/3/04, 5:59 pm 14