Panasonic BB-GT1540 - Manual (Page 53)

Programming
53 For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
For the answering system (BB-GT1540)
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 l Depending on the condition of your network connection, “Toll saver”
may not be used for the IP line.
Adjusting the handset ringer tone N
You can change the ringer tone heard when an outside call is received for each line.
You can also assign the ringtone you have imported (page 71). The default setting for
the IP line is “Tone 2” and for the TEL line is “Tone 1”.
1
{ MENU} i {#}{1}{6}{1}
2
{V}
/{^}: Select the desired line.
3
{V} /{^}: Select the desired setting.
4
{ SAVE} i {OFF}
Note:
L
k If you subscribe to a distinctive ring service (such as IDENTA-RING), select
a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their
ringers.
Feature Feature code Setting code Page
Call screening
*1
{ 3}{1}{0} { 1}: <On> {0}: Off 64
Recording
time
*1
IP {
3}{0}{5} i {1}
{
1}: 1min {2}: 2min
{ 3}: <3min>
64
TEL {
3}{0}{5} i {2}
Remote code
*1
{ 3}{0}{6} Default: 111 63
Ring count
*1
IP { 2}{1}{1} i {1} { 2}-{7}: Rings
<4 rings>
{
0}: Toll saver *2
63
TEL { 2}{1}{1} i {2}
Erase all
*1
(Erasing all messages)
{ 3}{2}{5} – 60
Play all msg. (All
message playback) { 3}{2}{4} – 59
Play new msg. (New
message playback) { 3}{2}{3} – 59
Voice prompt *1
(Voice guidance
language)
{ 1}{1}{2} { 1}: <English>
{ 2}: Español
27
GT15xx.book Page 53 Monday, June 4, 2007 8:52 AM