Troubleshooting, Problem possible cause solution – Philips SBC SC463 User Manual

Page 13

Advertising
background image

EN

13

Problem

Possible cause

Solution

Interference or poor

Mobile or cordless phone(s)

Move phone(s) away from

reception.

too close to baby monitor.

baby monitor.

Interference from other

Switch both units to another

baby monitors in the

channel using the channel

neighbourhood.

selection switch (A-8, B-7).

Battery power running low.

Replace batteries.

Transmitted signal is out of

Move parent unit closer

range; e.g. there are too many

to baby unit.

walls and/or ceilings between
baby unit and parent unit.

Parent unit located too close to

Move parent unit away

a window and picking up

from window.

interfering signals from other
appliances.

Pick-up from another

Both systems are operating

Switch channels (A-8, B-7).

baby monitor.

on the same frequency.

Make sure both units are set
to the same position.

LINK light (B-2)

Units are out of range.

Move units closer together.

flashing red / LINK
alarm (B-6) beeps.

Interference from another

Switch to a different channel

baby monitor.

(A-8, B-7).

Interference from another

Remove other FM source.

FM source.

Troubleshooting

Advertising
This manual is related to the following products: