Using your baby monitor other features, Avoiding interference (channel selection) – Philips SBC SC463 User Manual

Page 9

Advertising
background image

EN

9

4 Position the baby unit at least 1 meter / 3 feet away from

your baby.

5 Position the parent unit at the desired place within the

operating range of the baby unit but at least 1 meter / 3 feet
away from the baby unit. For more information on the
operating range see ‘Technical specifications’.

Your can now monitor you baby!

Using your baby monitor

Other features

Avoiding interference (channel selection)

Always make sure that the CHANNEL selection switches (A-8,
B-7) inside the battery compartments (A-9, B-10) on both units
are set to the same position! With the CHANNEL selection
switches (A-8, B-7) you can select sixteen different channel
positions. If you experience interference from other baby
monitors, radio devices, etc. select a different channel.

1 Open the battery compartment covers (A-9, B-10) of both

units.
• Parent unit: slide down the cover.

• Baby unit: use a coin.

2 If you are operating the units on battery power, remove the

batteries from both units.

Advertising
This manual is related to the following products: