7 dvb-t or dvb-c – Philips 32PFL9604H User Manual
Page 165
4.2.7 DVB-T or DVB-C
If both DVB-T and DVB-C reception is available in your
country, and this TV is prepared for both DVB-T and DVB-
C for your country, you need to select DVB-T or DVB-C
before you install TV channels.
To select DVB-T or DVB-C reception, press h > Setup >
Installation > Channel installation > Antenna/Cable DVB.
Select Antenna for a DVB-T installation.
Select Cable for a DVB-C installation.
DVB-C channel installation
All DVB-C TV settings are set to automatic but the DVB-C
network might need some settings supplied by the DVB-
C provider. Enter these settings or values when the TV asks
for them.
You can install your TV for DVB-T and DVB-C. In that case,
you need to carry out two channel installations. First, carry
out an installation with Antenna selected followed by an
installation with Cable selected. Afterwards, the Channel
overview will show both DVB-T and DVB-C TV channels.