Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 64)

Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)
—LOCAL (local
seek tuning)
—SEEK MODE (seek mode)—
BLENDING (reception mode)
Function and operation
BSM and LOCAL operations are basically the
same as that of the tuner.
Function name Operation
BSM
Refer to Storing the strongest
broadcast frequencies on page 15.
LOCAL
Refer to Tuning in strong signals
on page 15.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the playback display, press BAND.
Switching the seek mode
There are two method of seek tuning settings,
one is
SEEK HD (Digital broadcasting stations
seek) and the other is SEEK ALL (normal
seek).
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
SEEK MODE in the function menu.
3 Press MULTI-CONTROL to select your fa-
vorite setting.
SEEK ALL
—SEEK HD
Switching the reception mode
If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to on, the tuner switches
between digital broadcast and analog broad-
cast automatically. If this function is off, recep-
tion will be conducted within an analog
broadcast.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
BLENDING in the function menu.
3 Press MULTI-CONTROL to select your fa-
vorite setting.
ON
—OFF
Available accessories
En
64
Section
06