Panasonic CN-GP50N - Manual (Page 21)

Routes with Stages - 21 -
Changing the Starting Point
►
Tap the Specify Starting Point field.
The S TARTING P OINT menu opens. You can now enter a different
starting point. Proceed as described above.
6.1.2 Entering Route Points
Route points of a route are destinations that you want to navigate to.
The flow number for each route point can be found on a button in front
of it.
1. Tap the Add Route Point field.
The R OUTE P OINT menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of chapter
"Navigation" on page 10)
4. Tap the Add button.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
6.1.3 Editing Route Points
Route points can be deleted from a route. The order of the route points
can be varied as you like.
Note: The start point (flow number "0") can neither be moved nor
deleted.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route point forwards.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point backward.
(Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
►
Tap on the route point's flow number to close the context menu.