Panasonic CN-GP50N - Manual (Page 34)

- 34 - Useful Functions
►
In the M ENU window, tap on Information > Traffic.
The T RAFFIC I NFORMATION window opens.
Selecting the Type of Displayed Messages
Above the list, the Traffic reports button shows the type of traffic
messaging listed and how many messages of this type are listed.
1. Tap the Traffic reports button.
2. Select the type of messages to be displayed.
3. Tap
the OK button.
Displaying Message Details
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
►
Tap the (Information) button of the message for which you
would like to see details.
Avoiding / Ignoring Congestions
The navigation system can Avoid ( ) or Ignore ( ) congestion on
the route. The Avoid / Ignore button shows the corresponding status.
►
Tap the button to select the alternative setting.
►
Tap the (Back) button to close the T
RAFFIC
I
NFORMATION
window.
9.2.2 TMC Settings
►
In the T RAFFIC I NFORMATION window, tap on TMC Settings.
In the TMC S
ETTINGS
window, you can set and configure the TMC traffic
station, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
►
Automatically: Use the arrow keys of the station section to select
another station. The system will search for another station if
reception becomes poor.
►
Hold station: Use the arrow keys of the station section to select
another station. The system will search for the same station on a
different frequency if the signal becomes poor.