Printronix P5000LJ Series - Manual (Page 27)

NIC
27
NIC
The NIC at the rear of the printer has two indicator lights and two dipswitches,
as shown in Figure 4.
Figure 4. Status Indicator Lights and Dipswitches
Run and Auto Reset Modes
Run Mode is the normal operating state of NIC. Auto Reset mode is entered
when the watchdog timer is triggered and the Print Server resets itself. In
either mode, the STAT LED flashes at a varying rate, depending on whether
the unit IP address is configured. The Run Mode and Auto Reset Mode
indicator descriptions are given in Table 2.
Table 2. Indicator Modes
STAT Indication Description
OFF flashes on once per second Normal Mode, IP address
configured
OFF flashes on twice per second IP address not configured
ON flashes off once per second Download (MOS)
ON flashes off twice per second Error
STAT (System Status)
NET (Data to Network)
1 2 Shown in OFF
(default) position
Dipswitches