Default settings, Shdsl parameter defaults, T1 uplink parameter defaults – Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T User Manual
Page 15: T1 uplink parameter, Defaults
Advertising
15
Default Settings
SHDSL Parameter Defaults
T1 Uplink Parameter Defaults
Table 1. SHDSL Defaults
Parameter
Default
Backbone-VLAN
0 (off)
Circuit Identification
n/a (no default)
Flood
Uplink
IP Range 1
0.0.0.0 – 255.255.255.255
IP Range 2
0.0.0.0 – 0.0.0.0
Protocol
All
Speed
272 kbps
VLAN Priority
0 (none)
VLAN Range
0 - 0 (off)
Table 2. T1 Defaults
Parameter
Default
Frame Type
Extended Super Frame (ESF)
Line Attenuation
0 dB
Line Code
Bipolar with 8 Zero Substitution (B8ZS)
Speed*
n/a (T1 uplink speed is determined via communication with the
remote T1 provider equipment to which the SMD2000-24T is
connected)
Timing*
* Speed and timing are non-configurable parameters for the SMD2000-24T T1
uplink ports.
Loop
Advertising