Panasonic DP-8025 - Manual (Page 151)

151
Inter
n
et Fax
F
eat
u
re
s
Inbound Routing
Your machine can route documents received from a G3 fax machine to email address(s), or to Internet Fax
machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s) over the telephone line.
To use this feature, the Fax Parameter No. 152 "Sub-Addr Routing", and/or No. 153 "TSI Routing" must be
set to "2:Valid".
No. 152 Sub-Addr Routing: Set this parameter to perform an ITU-T sub-address query within its auto dialer,
and to route the received document(s) to the corresponding stations email address(s), or telephone
number(s).
No. 153 TSI Rout: Set this parameter to perform a Numeric ID (TSI frame information) query within its auto
dialer, and to route the received document(s) to the corresponding stations email address(s), or telephone
number(s).
No. 154 Rout Header FMT: Use this parameter to select the type of email header to be included in the
"From" field of each routed faxes. (Default setting is "1:Originator")
Originator : The originating fax machine’s TSI will appear in the "From" field of the routed email.
Relay Station : The routing station’s email address will appear in the "From" field of the routed email.
No. 155 Print Routed Doc: Set this parameter to select whether a received fax to be routed is always
printed on your machine, or only when the routing operation fails.
To set the above Inbound Routing parameters, follow the steps below.
Setting the Routing Parameters