Customizing your machine, Fax parameter table – Panasonic DP-8025 User Manual

Page 191

Advertising
background image

Customizing Your Machine

191

Fax Parameter Table

S

e

tt

ing Y

o

u

r

Mac

h

in

e

014

File Acceptance Report

*Invalid

Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
memory communication.

Valid

017

Receive Mode

Manual

Setting the reception mode to automatic, or manual.

*Auto

022

Substitute Receive

Invalid

Selecting whether the machine receives to memory when the recording
paper runs out, toner runs out, or the recording paper is jammed.

*Valid

024

Print Reduction

Fixed

Selecting print reduction mode.
Fixed : Reduce received document according to setting of Parameter

No. 25.

Auto : Automatically determines, and reduces the incoming document

to print onto the paper loaded in the machine.

*Auto

025

Reduction Ratio

70%

Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected on
Fax Parameter No. 24.

----

100%

026

Polling Password

(----)

Setting a 4-digit password for secured polling. (See page 48)

027

Polled File Save

*Invalid

Selecting whether the machine retains the polled document in memory
even after the document is polled once.

Valid

028

Stamp At Memory XMT

Invalid

Selecting whether the machine stamps the original documents when
storing the documents into memory.
(Depends on the Stamp setting on the Control Panel)

*Valid

031

Incomplete File Save

*Invalid

Selecting whether the machine retains the document in memory if the
document is not successfully transmitted.

Valid

033

XMT Reduction

Invalid

Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.

*Valid

037

Receive to Memory

(----)

Enter a 4-digit password for printing the received document(s) in
memory by using

.

When

is set to ON, this parameter is not

selectable on the LCD display. (See page 84)

039

PIN Code Access

*None

Selecting the access method (Prefix or Suffix) to dial a number with PIN
Code. (See page 87)

Suffix

Prefix

042

Conf. File Save

*Invalid

Selecting whether the machine saves the confidential polled file even
after the file is polled once.

Valid

* = Factory default setting

No.

Parameter

Setting

Comments

MODE SETTING

SELECT MODE

RECEIVE TO MEMORY

RECEIVE TO MEMORY

Continued on the next page...

Advertising