Panasonic PAN4570 - Manual (Page 3)

CLASSIFICATION
Einstufung No.
DS-Eval4570-2400 REV.
C
SUBJECT
Thema EvalBoard PAN4570 PAGE
Seite
3 of 20
CUSTOMER’S CODE
EvalPAN4570 PANASONIC’S CODE
DATE
Datum
06.11.2006
European Technology Center
Panasonic Electronic Devices (EUROPE) GmbH
APPROVED
genehmigt
CHECKED
geprüft
DESIGNED
Erstellt
1. OVERVIEW
The EvalKit PAN4570 allows evaluation of the wireless module PAN4570.
For a basic hardware evaluation the test software Ember Range Test Application V2.0
and the Ember
TM embedded bootloader are programmed. The embedded bootloader
can be used for loading other applications via the serial cable to PAN4570, for example
the EmberZNet sample application “simple-lighting”.
For more information see chapter 9.3.
1.1. CONTENTS OF THE EVALUATION KIT:
- 2 x ISM RF Transceiver Testboards
- 2 x PAN4570 mounted on a carrierboard
- 2 x 2,45GHz antennas with male SMA plugs
- 2 x RS-232 cables
- 2 x battery adaptors with cable for d. c. power supply
- 1 x CD with software and documentation
1.2. HARDWARE NEEDED
- 12 x Batteries (AA size) (or 2 mains supplied 9Vdc sources)
- PC with at least 1 (preferably 2) free COM Ports
1.3. SOFTWARE NEEDED
- Microsoft™ “Hyper Terminal” or any other terminal software installed on a pc
- EmberZNet installed on a pc, currently Version 2.5.0
- Ember
TM xIDE for EM250 compiler and debugger installed on the pc where
EmberZNet is installed on
- Ember TM InSight Desktop installed on a pc for network development
- Ember TM Range Test Application V2.0 (Version Oct. 1 2006). This basic hardware
test software and the EmberZNet sample application “simple-lighting” are ready for
programming included on the CD within this kit.
Programming and debugging with Ember
TM xIDE requires at least 1 Ember TM Insight
Adaptor.
Loading an image file (.ebl as output from xIDE) to PAN4570 via the included serial
cable is possible as well, in this case the Insight Adaptor is not needed