Philips 19PFL3403/77 - Manual (Page 24)

24
Note
Certain picture and sound features are not available in
HDMI and YCbCr modes.
•
Supported screen resolutions
The following screen resolutions are supported
in HDMI and YPbPr modes:
Resolution Refresh rate
480i 60Hz
480p 60Hz
576i 50Hz
576p 50Hz
720p 50Hz
720p 60Hz
1080i 50Hz
1080i 60Hz
If necessary, adjust the picture position to the
center of the screen with the cursor buttons.
Adjust display settings in HD
mode
Adjust your TV display settings in HD mode.
1
Press MENU/BACK and select [Features]
> [Geometry].
2
Press OK.
3
Press or to select an item.
Geometry
Horizontal Shift
Vertical Shift
+50
+50
Picture Sound Features Install
: SEL MENU : ADJ : EXIT
Geometry
Horizontal Shift
Vertical Shift
+50
+50
Picture Sound Features Install
: SEL MENU : ADJ : EXIT
8 Use your TV in
HDTV mode
Not all models can be configured in high
definition (HD) mode. For information about
your set, see the specification.
When you connect an HD device to your TV,
configure the display format of your TV. You
might also have to configure the display format
of your HD device. For information about
configuring your device, see the documentation
of the device.
Configure your TV in HD
mode
1
Connect your HD device to the TV. Refer
to the Quick Start.
2
Press SOURCE and select HDMI or
YPBPR, then press OK.
3
Press MENU/BACK and select [Features]
> [Mode Selection].
4
Press OK.
5
Press or to select a mode.
6
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometry
Mode Selection
5
Picture Sound Features Install
Widescreen
>
>
>
Off
>
HDMI
: SEL MENU : ADJ : EXIT
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometry
Mode Selection
5
Picture Sound Features Install
Widescreen
>
>
>
Off
>
HDMI
: SEL MENU : ADJ : EXIT
EN