Polycom VVXTM 1500 - Manual (Page 17)

Getting Started with Your Phone
1 - 9
The following figure shows how to connect a headset to the Headset jack on
the phone.
For information on using a headset to place and answer calls, see
Placing Calls on page 3-6 and Answering Calls on page 3-12 . For information
on permanently enabling your phone to use headset mode, see
Enabling Headset Memory Mode on page 2-7 .
For information on connecting and using a headset that supports electronic
hookswitch, see
Using Electronic Hookswitch on page 2-8 .
Connecting an Optional USB Flash Drive
Attach a removable USB flash drive to your phone to do the following:
• Record and play back audio from your phone.
• Display images on your phone’s idle screen.
You attach the USB flash drive to the USB port on the right side of your phone.
The USB port is behind a door you flip down.
For a list of supported USB flash drives, see Technical Bulletin 38084, Supported
USB Devices for SoundPoint IP 650/670 and Polycom VVX 1500 Phones, at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html
.