Plantronics CT11 - Manual (Page 13)

25
P
HONEBOOK
24
C
HAIN
D
IALING
The memory locations in the remote are not
limited to phone numbers. You can also
store a group of numbers (up to 20 digits),
that you need to enter once your call
connects. This is referred to as Chain
Dialing.
An example of this is a bank account
number. Store the special number in the
Phonebook location (refer to “Storing Phone
Numbers, Names, Distinctive Rings and
Speed Dial” on page 17).
Once you have called your bank, and when
you are prompted to enter the account
number, press /tSPEED and use ▲ or ▼
to select the number in the Phonebook
location, then press SELECT/CH.
3) When the Phonebook
location to be edited
appears, press
SELECT/CH. “Store/Edit Name” appears.
4) Follow the steps 3 to 7 under “Storing
Phone Numbers, Names, Distinctive Rings
and Speed Dial” starting on page 17 to
complete the editing operation.
5) Press SELECT/CH. You will hear a
confirmation tone and “Done!” appears
on the display.
D ELETING THE S TORED D ATA
1) Select the
Phonebook location
to be deleted.
Press DELETE.
“Delete Memory?” appears.
2) Press ▲ to move
the pointer to
“Yes”.
3) Press SELECT/CH
or delete. You hear
a confirmation
tone. “Deleted!”
appears in the display.
CT11-12_020904 2/13/04 10:47 AM Page 24