Plantronics CT11 - Manual (Page 5)

9
TIPS
8
TIP
1) When the phone is in the standby mode,
press MENU/MUTE.
2) Press ▲ or ▼ to
move the pointer
to “Ringer Volume”,
then press SELECT/CH.
3) Press ▲ or ▼ to move the pointer
through the ringer settings (Ringer Off,
Ringer Low, or
Ringer High).
You will hear a
ringer or melody
at the selected volume (or does not ring
when you select “Ringer Off”).
4) Press SELECT/CH, and you will hear
a confirmation tone.
5) Press END to exit.
You can temporarily mute the ringer tone.
When the remote is off the base and the
phone is ringing, press END. The ringer
tone will return to the previous setting
starting with the next incoming call.
R
INGER
V
OLUME
S
ETUP
If you select
“Ringer Off”,
<Ringer Off>
appears on the
display when you
make or receive
calls, or when
charging the
remote.
R
EDIALING A
C
ALL
The last three phone numbers dialed can be
quickly redialed.
R EDIALING FROM S TANDBY M ODE
1) Press PAUSE/
REDIAL. The
phone number
that was last
dialed appears
on the display.
2) Press PAUSE/
REDIAL again.
Each press of
PAUSE/REDIAL
will display one
of the last three
numbers
dialed.
3) Press TALK/FLASH. The selected number
is dialed.
4) Press END to hang up.
R EDIALING FROM T ALK M ODE
1) Press TALK/FLASH.
2) Press PAUSE/REDIAL. The last number
dialed will be displayed and redialed.
3) Press END to hang up.
PAUSE/REDIAL
PAUSE/REDIAL
PAUSE/REDIAL
If the number
exceeds 32 digits,
only the first 32
digits are
retained in
redial memory.
If the redial
memory is empty,
you will hear a
beep.
If you have not
pressed any key
for 30 seconds,
the phone returns
to standby mode.
If you press END,
the operation is
canceled and the
phone will return
to the standby
mode.
When using the
redial feature in
talk mode, only
the last number
dialed will be
displayed.
B
A
SICS
R INGER M UTE ( TEMPORARILY )
CT11-12_020904 2/13/04 10:47 AM Page 8