Philips AZ1852 - Manual (Page 15)

Connect power
Warning
Risk of product damage! Ensure that the power supply voltage •
corresponds to the voltage printed on the bottom of the apparatus.
If your product is equipped with a • Voltage selector, set the Voltage
selector to the local power line voltage.
Risk of electric shock! When you disconnect the AC power, always •
pull the plug from the socket. Never pull the cord.
Install the apparatus near the power supply socket and where the •
power plug can be easily reached.
1
Connect the AC power cord to the AC input jack on the
apparatus and to the power supply socket.
To switch the apparatus off completely, disconnect the AC •
power cord from the power supply socket.
Note
To save energy: turn off the apparatus after use. •
4 Play
Play CD
1
Slide the Source selector to CD.
2
Pull LIFT-OPEN to open the disc tray.