Roubleshooting – Powerware 5115A USB User Manual
Page 31
25
Powerware
®
5115A USB User’s Guide
•
www.powerware.com.au
C H A P T E R 7
T
ROUBLESHOOTING
If you have a question or problem, the troubleshooting table may help (See Table 8). If
you need assistance, phone Powerware Service or your local Powerware office. Please
have the model number and serial number (located on the rear of the unit) available.
If the unit must be returned, Powerware will give you a Return Authorisation (RA)
number. Phone Powerware National Service & Repair Centre on 1300 303 059 for an
RA number before returning the unit for any reason.
This section explains:
•
UPS alarms and conditions
•
How to silence an alarm
•
Service and Support
A u d i b l e A l a r m s a n d U P S C o n d i t i o n s
The UPS has an audible alarm feature to alert you of potential power problems. When
the alarm is activated, the UPS beeps in different intervals according to a particular
condition. Use Table 8 to determine and resolve the UPS alarms and conditions.
Silencing an Audible Alarm
To silence the alarm for an existing fault, press the
button. If UPS status changes,
the alarm beeps, overriding the previous alarm silencing. The alarm does not silence if
there is a UPS fault, low battery condition, or if the battery needs to be replaced.