Pride Mobility Jazzy 1107 INFINFB2041 User Manual

Page 3

Advertising

www.pridemobility.com

INFINFB2041/Rev A/11-29-06

ASIC

ROUBLESHOOTING

NSTRUCTIONS

: J

AZZY

1107

What if the speed LEDs on the VSI begin to flash?
! Determine if the battery charger is connected to the controller. When the battery charger is connected to the

controller, an internal charger inhibit feature keeps the power chair from driving. This is indicated by the VSI
speed LED(s) flashing.

What if the speed LEDs on the VSI begin to scroll?
! Determine if the VSI has been placed in lock mode. The VSI is equipped with a lock mode feature that

prevent unintended use of the power chair. If the VSI is in lock mode, deflect the joystick full forward until it
beeps, then deflect the joystick full rearward until it beeps, and finally return the joystick to the neutral position.
The joystick should go back to the drive function.

FLIGHT DIAGNOSTIC FLASH CODES
The battery condition meter will flash fault codes when the FLIGHT controller detects an abnormal condition in the
electrical system. The battery condition meter consists of ten lights arranged in an arc over the on/off key. When the
batteries are at full charge, all ten LEDs will be lit in a steady display. As the battery voltage drops, the number of
lights reduces from right to left. When a fault is detected by the controller, the battery condition meter LEDs will
flash in a numbered sequence followed by a 2-second pause.

CODE SEQUENCE

CODE

CAUSE

POSSIBLE SOLUTION

One pause One

Possible Stall Timeout

Turn joystick off then on.

Two pause Two

Battery Fault

Charge batteries.

Three pause Three

Left Motor Fault

Make sure left motor is
plugged in.

Four pause Four

Right Motor Fault

Make sure right motor is
plugged in.

Five pause Five

Left Park Brake Fault