Panasonic SC-HT790V - Manual (Page 37)

37
RQT6951
You can watch and listen to other content when the unit is in timer
recording standby or during VCR recording.
∫ Television ( ➡ page 16)
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered
buttons or [ 3 CHW], [4 CHX].
∫ DVD ( ➡ page 18)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VCR] to select “DVD”.
3 Insert a disc and start play.
∫ Radio ( ➡ page 46)
1 During recording
Press [TUNER] to put the remote control in TUNER mode.
2 Press [FM/AM] to select the radio band.
3 Select the radio channel with the numbered buttons or [
3 CHW],
[ 4 CHX].
[Note]
When you want to operate the VCR section again, be sure to press
[VCR] to put the remote control in VCR mode.
You can record from other video equipment (VCR, camera, etc.)
Preparation
≥Connect the equipment to this unit’s input terminals.
–Turn the unit off before making connections.
–If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
≥Insert the tape, ensuring its tab is in place and find the place to
start recording.
1
Press [ 3 CHW] or [4 CHX] to select
“AU” channel.
2
Press [ 1] (play) to find the place to
start recording.
3
Press [ ;], then while pressing [VCR],
press [ ¥ REC] to put the unit in
recording standby mode.
4
Press [SPEED] to select the tape
speed.
Each time you press the button:
SP
>EP>VP
^"""""""b
5
Start play on the other equipment.
6
Press [ ;] when you want to start
recording.
To stop
Press [
∫].
∫ To make a timer program to record from other
equipment ( ➡ page 38)
Using another source while recording Recording from other equipment
Y
P B /C B
P R /C R
COMPONENT
VIDEO OUT
S-VIDEO
OUT LINE
OUT LINE
IN
VIDEO
OUT
VIDEO
IN
L
R
RF IN RF OUT
LOOP EXT 75
AM ANT FM ANT
LOOP
ANT
GND
DVD EXT DVD/
VCR
Other equipment (play)
Audio/video cable
(not included)
To video and audio
out terminals
[Remember] Press [VCR] first.