Panasonic SC-HT790V - Manual (Page 11)

11
RQT6951
SC-HT790V, SC-HT800V
The front and surround speakers are the same. Use those you
have connected the short cords to as front speakers and those you
have connected the long cords to as surround speakers.
[1] Attaching the stickers to the speaker
cables
Attach the speaker-cable stickers to make connection easier.
[2] Connecting the speakers
Keeping the cables out of the way (SC-HT810V only)
Pass the cables through the holes in the stand to keep them out of
the way. [Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i)
terminals and negative (silver) wires to negative ( j) terminals.
Incorrect connection can damage the speakers.
Caution
Hold the speakers by the sides.
Applying pressure to the front
net can damage the speaker.
STEP
2
Speakers
Speaker cables
≥3a4-m (13-foot) cables
≥2a10-m (33-foot) cables Sheet of speaker-cable
stickers
The illustrations show SC-HT810V.
Setup example
Short cables
Long cables
Copper
Silver
_ :
` :
Front (L)
Subwoofer
Copper
Front (R)
Surround (L)
Surround (R)
Center
Silver
Click!
1 Pass the cable through the hole.
2 Pass through the cutout in the base.
Stand