Philips 32PFL3514D - Manual (Page 16)

15
English
DTV
1
Press SAP to display the currently selected language and the
number of available languages.
6.1
English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
• SAP does not control external audio devices.
• The information display will automatically disappear in a few seconds.
Watch a DVD
To watch a DVD
1
Insert a DVD disc into your player.
2
Press on the remote control of the DVD player to select
channels.
» The DVD might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the DVD player and wait a
few seconds for the picture to appear.
2
Use the remote control of the DVD player to play the disk.
Switching Audio Mode
This section describes how to switch the audio in the analog mode and
how to switch the audio language in the digital mode.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
6
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
SAP / MONO SAP / MONO
When only monaural audio is available
MONO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
EN
(Cannot be switched)