Philips 32PFL3514D - Manual (Page 9)

8
Insert the Remote Control Batteries
1
Slide the battery cover off the back of the remote control.
2
Insert the 2 supplied batteries (AAA). Be sure the + and - ends of
the batteries line up with the markings inside the case.
3
Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of time.
Connect the Antenna or Cable
32PFL3504D / 32PFL3514D
Cable
42PFL3704D
Cable
4 Get Started
This section supplements information in the Quick Start. For
information about how to mount and install your TV, refer to the Quick
Start.
Position the TV
Warning
• Do not insert the power plug into the wall socket before all the connections are
made.
• Large screen TVs are heavy. Two people are required to carry and handle a large
screen TV.
• Before you move the TV, disconnect the cables to prevent breakage.
In addition to reading and understanding the safety instructions,
consider the following before positioning your TV:
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its screen
size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
Use a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
32PFL3504D / 32PFL3514D
42PFL3704D
EN