Philips BZA800AL Series User Manual
Data sheet
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Features
- Pinning
- Limiting values
- Note s
- 410
- K/W
- 200
- K/W
- 185
- K/W
- Note
- 1. Solder point of common anode (pin 2).
- Electrical characteristics
- Fig.2 Maximum non-repetitive peak reverse current as a function of pulse time.
- Fig.3 Maximum non-repetitive peak reverse power dissipation as a function of pulse duration (square pulse).
- Fig.4 Diode capacitance as a function of reverse voltage; typical values.
- Fig.5 Power derating curve.
- Fig.6 ESD clamping test set-up and waveforms.
- Note
- Application information
- Device placement and printed-circuit board layout
- 1. Place the suppression element close to the input terminals or connectors
- 2. Keep parallel signal paths to a minimum
- 3. Avoid running protection conductors in parallel with unprotected conductors
- 4. Minimize all printed-circuit board loop areas including power and ground loops
- 5. Minimize the length of the transient return path to ground
- 6. Avoid using shared transient return paths to a common ground point.
- Package outline
- Data sheet status
- Note s
- 1. Please consult the most recently issued document before initiating or completing a design.
- 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
- Disclaimers
- Note s
- Printed in The Netherlands 613514/01/pp9 Date of release: 2002 Jan 11 Document order number: 9397 750 09173