Peavey BAM 210 - Manual (Page 39)

39
Offset Name Range (Decimal)
(Hex)
00 <reserved> Reserved (keep at zero)
01 Bank Select Method 0 = Preset (1-4) stays
the same after bank
select (default)
1 = Preset goes to #1 after
bank select
2 = Preset light blinks, waits for
user preset selection
02 PFC4B All Info 0 = Inactive mode - LEDs off
1 = Inactive mode - LEDs
dim (default)
2 = Inactive mode - LEDs
bright for both modes
03 MIDI Channel (- 1) 0-15 for 1-16 (default = 0,
channel 1)
04 Global Bits Bit 0 set for User patches
at powerup (default = 0,
factory)
Bits 1-7 are reserved (keep at
zero)
05 Noise Gate Threshold 0=off, 1-25 (default = 0)
06 Noise Gate Sensitivity 0-25 (default = 5)
07 <reserved> Reserved (keep at 0)
08 <reserved> Reserved (keep at 0)
09 Tuner Bits Bit 0 set for Eb mode (default =
0, standard E mode)
Bit 1 set for Chromatic mode
(default = 0, bass mode)
Bits 2-7 are reserved
(keep at 0)
0A Tuner Volume Level 0-25. Default is 0 (muted).
0B<reserved> Reserved (keep at 0)
0C <reserved> Reserved (keep at 0)
0D <reserved> Reserved (keep at 0)
GLOBALS