Philips 201B4 User Manual
Page 80
The OSD Controls
4) Press the
button to confirm your selection and return to MAIN CONTROLS window. CLOSE
MAIN CONTROLS will be highlighted...
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to continue to INPUT SIGNAL SELECTION, press the
button until INPUT
SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL
SELECTION.
. . . to exit completely, press the
button
RETURN TO TOP OF THE PAGE
INPUT SIGNAL SELECTION
(Not available in all models)
INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT
A, but if the video input signal is different that the output signal, you may want to change it to INPUT
B.?
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until INPUT SIGNAL SELECTION is highlighted.
file:///D|/EDFU/crt_19_5/edoc/english/OSD/osd_cont.htm (4 of 27)2005-04-21 ¤W¤И 09:39:35