Pioneer VSX-D909S - Manual (Page 14)

14
Example Connection for a DVD/LD or LD player
To connect a DVD/LD player or LD player with it's 2 RF output, a commercially available RF demodulator (RFD-1) is
required. The RF demodulator changes the RF signal to a digital signal which is then processed by the VSX-D909S
model through their digital input jacks. For more details, refer to the instruction manual supplied with the RFD-1.
We also recommend hooking up your digital components to analog audio jacks.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.
*The arrows indicate the direction of the audio signal.
Digital Input Assignment
Unlike analog connections, the jacks for digital connections are not dedicated to one type of component, they
can be used freely. Thus you must tell the receiver what digital component in which jack so your components
will be in sync with the names on the remote control buttons and the like. To avoid having to assign the digital
inputs you can hook up your equipment in accordance with the receiver's default settings.
The default settings are:
DIGITAL IN 1: DVD/LD
DIGITAL IN 2: CD
DIGITAL IN 3: MD
DIGITAL IN 4: TV/SAT
DIGITAL IN 5: VCR1
You will notice that Digital IN 1, for example, is a coaxial jack. If your DVD/LD player only has an optical out jack on
it then you won't be able to hook up your components in accordance with the VSX-D909S default setting. In this
case you will need to assign the digital inputs. See Digital-In Select on p.31 in order to do this.
Connecting Your Equipment
CD IN
SURR-
OUND
SUB
WOOFER
CENTER
FRONT
MULTI CH IN
SURR-
OUND
R L
R L
R L
R L
R L (Single)
R
R
L
L
R
L
R L
FRONT
AUDIO
SUB
WOOFER
PRE OUT
CENTER
COMPONENT VIDEO
DVD/LD
IN
TV/SAT
IN
Y
P B
P R
MONITOR
OUT
MONITOR
OUT
MONITOR OUT
P B
P R
Y
MULTI CH IN
SURROUND BACK
SURROUND BACK PRE OUT
DVD / LD
IN
S VIDEO VIDEO VIDEO AUDIO
IN
TV /
SAT IN IN
OUT
IN
VCR1 / DVR
OUT
IN
OUT
IN
VCR2
OUT
IN
CONTROL MULTI-ROOM &
SOURCE
IN
OUT
MD / TAPE1/
CD-R
PLAY
REC
TAPE2
MONITOR
PLAY
REC
PCM/ 2 / DTS
DIGITAL
IN 5 IN 4 IN 3 IN 2 IN 1
IN
PHONO
FM UNBAL
75‰
FM
ANTENNA
AM LOOP ANTENNA
OUT OUT 2 1
MULTI-
ROOM &
SOURCE
OUT
REMOTE IN
DVD/LD player
or LD player
RF demodulator RFD-1
1
2 3
DIGITAL OUT
(AC-3)(LD)
RF OUT 2
DIGITAL IN
PCM/
(OPT.) PCM/
RF IN
(AC-3)(LD) DIGITAL OUT
PCM/
(OPT.) PCM/
OPTICAL COAXIAL
DIGITAL IN
COMPO-
NENT
VIDEO
OUT
VIDEO
S-VIDEO P B
Y
P R
STEREO
L
R
ANALOG
memo
Make sure the RF demodulator digital in
switch is set correctly (optical or coaxial
depending on the connection).
(not a PCM-only output)