Pride Mobility scooter - Manual (Page 29)

Victory/Rev L/Mar03 www.pridemobility.com 29
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rear-
ward to one of three settings to adjust the distance be-
tween the seat and the tiller. See figure 13.
1. Remove the seat from your scooter. See IX. “Disas-
sembly and Assembly.”
2. Remove the four bolts that fasten the seat to the seat
platform.
3. Align the seat platform with the desired set of holes on
the seat.
4. Install the four bolts securely.
ARMREST WIDTH ADJUSTMENT
The armrest width of your scooter can be adjusted inward
or outward. See figure 14.
1. Loosen the thumbscrews at the back of the seat frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the thumbscrews.
The armrests also pivot upward to make getting onto and
off of your scooter easier.
SEAT LOCK LEVER
The seat lock lever locks the seat in one of five positions.
See figure 15.
1. Push the seat lock lever forward to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in
place.
The Victory requires no tools for disassembly. Always dis-
Figure 15. Seat Lock Lever
Figure 14. Armrest Width Adjustment
THUMBSCREWS
ARMRESTS
SEAT FRAME
V I I I . C O M F O R T A D J U S T M E N T S
Figure 13. Front-to-Back Seat Adjustment
SEAT LOCK
LEVER
SEAT
PLAT-
FORM
SEAT
BOLTS
PUSH
FORWARD
TO ROTATE
SEAT