Paradyne FrameSaver SLV 9664 - Manual (Page 132)

Troubleshooting
6-2 9664-A2-GB20-00 March 2000
H Physical Tests
— DTE Loopback
H IP Ping Test
H
Lamp Test
Problem Indicators
The unit provides a number of indicators to alert you to possible problems:
Indicators . . . See . . .
LEDs Viewing LEDs and Control Leads and LED Descriptions in
Chapter 5, Operation and Maintenance, as well as the
user interface screen.
Main Menu
→
Status
→
Display LEDs and Control LEDs
Health and Status Health and Status Messages in Chapter 5, Operation and
Maintenance.
Main Menu
→
Status
→
System and Test Status
Messages also appear at the bottom of any menu-driven
user interface screen.
Performance statistics Performance Statistics in Chapter 5, Operation and
Maintenance, to help you determine how long a problem
has existed.
Alarm conditions that will
generate an SNMP trap Alarms on page 6-7.
SNMP traps Appendix B, SNMP MIBs and Traps, and RMON Alarm.
Traps supported include warm-start, authentication-failure,
enterprise-specific (those specific to the unit), link-up, and
link-down.