Maintenance, Suspension settings – Polaris Outlaw 450 S User Manual
Page 169
Advertising
166
Maintenance
Suspension Settings
Use a flat-blade screwdriver to make damping adjustments.
NOTE:
When the adjuster screw is turned clockwise until it stops, the damping is in the fully closed
position.
Rear Shock (Standard and Limited Edition)
Front Shock (Limited Edition)
Setting
Compression Damping
Rebound Damping
Softest
20 clicks from closed
24 clicks from closed
Factory
10 clicks from closed
16 clicks from closed
Firmest
2 clicks from closed
2 clicks from closed
Setting
Compression
Softest
20 clicks from closed
Factory
10 clicks from closed
Firmest
2 clicks from closed
Advertising
This manual is related to the following products: