Menu contents, Main menu 1 of 2 (main menu), Video in/out – Panasonic AJ-D410A User Manual
Page 35: Vtr function, Vtr option
35
Menu contents
MAIN menu 1 of 2 (main menu)
VIDEO IN/OUT
Item
Setting
options
Remarks
VIDEO OUT MENU
ON
OFF
For selecting whether to output the menu
screens to the VIDEO OUT connector.
ON: For the screens are output.
OFF: For the screens are not output.
<Note>
The VIDEO OUT MENU item is valid only
when ENC has been selected as the
VIDEO OUT setting.
SET UP
0%
7.5%
For selecting the CAM signal setup. When
7.5% is selected, 7.5% setup is also
applied to the tape.
VIDEO OUT SEL
ENC
VF
For selecting whether the VTR signals or
VF signals are to be output from the VIDEO
OUT connector.
ENC: For VTR output
VG: For VF output
VTR FUNCTION
Item
Setting
options
Remarks
TC MODE
DF
NDF
For setting the time code to the DF or NDF
mode.
DF: For drop frame mode
NDF:For non-drop frame mode
FF/REW SPEED
a
32
a
64
For setting the fast forward and rewind
speed.
a
a
32: 32 times normal speed
a
a
64: 64 times normal speed
UB MODE
USER
TIME
DATE
TCG
EXT
For selecting what is to be recorded in the
user’s bit area.
USER: User setting (fixed)
TIME: Real time value in hours/minutes/
seconds
DATE: Real time value in year/month/day/
hours
TCG: Time code generator value
EXT:
The UBG value is slave-locked
when the external time code is
input.
FIRST REC TC
REGEN
PRESET
For selecting whether the TC REGEN
mode is to be established when recording
is started.
REGEN: The regeneration mode is
established for the time code on
the tape.
PRESET: The regeneration mode is not
established for the time code on
the tape. However, it is forcibly
established when the unit is
transferred from REC PAUSE to
REC.
VTR OPTION
Item
Setting
options
Remarks
TIME STAMP
REC
NO-REC
For selecting whether to superimpose the date
and time onto the camera’s video recording.
REC:
For superimposed
NO-REC: For not superimposed
<Note>
When REC is selected, select the type of
date and time to be superimposed with the
TIME/DATE item of <VF DISPLAY 2/2>
sub-menu.
PAUSE TIMER
10min
20min
30min
60min
For setting the time that is allowed to elapse
before REC PAUSE is replaced with SAVE.
INTERVAL REC
OFF
ON
ONE-SHOT
For setting whether to perform intermittent
recording.
OFF:
Not performed
ON:
Performed
ONE-SHOT: Recording is performed once for
the period set for REC TIME, and
then stops.
INTERVAL TIME
00h00m10s
:
23h59m59s
For setting the REC PAUSE time during
intermittent recording.
<Note>
The INTERVAL TIME item is valid only
when ON has been selected as the
INTERVAL REC setting.
REC TIME
00m05s
:
59m59s
For setting the recording time for
intermittent recording.
<Note>
The REC TIME setting is effective only
when ON or ONE-SHOT is set for
INTERVAL REC.
“
” indicates the factory setting.
WIRELESS WARN
ON
OFF
For selecting whether the WIRELESS RF
warning is to be displayed on the viewfinder
screen if the signals received when the
wireless receiver is used are weak.
ON: Displayed
OFF: Not displayed
TC OUT
TCG
TCG/TCR
For selecting the TC OUT output.
TCG:
The TCG value is output at all times to
TC OUT regardless of EE/VV.
TCG/TCR:
In the EE status, the TCG value is output
to TC OUT; in the VV status, the TCR
value is output.