Panasonic AJ-D410A - Manual (Page 44)

44
Video system
[VTR UNIT]
Recording format: DVCPRO format
Sampling frequency Y: 13.5 MHz
P
B
/P
R
: 3.375 MHz
Quantizing: 8 bits
Audio system
Tape transport system
Sampling frequency: 48 kHz (synchronized with video)
Quantizing: 16 bits
Frequency response: 20 Hz to 20 kHz
Tape format: L-size DVCPRO cassette tapes
Tape speed: 33.820 mm/sec.
Maximum recording time: 184 min. (using the AJ-P184LP)
DC IN (XLR, 4 pins, male): DC 12 V (DC 11 V to 17 V)
DC OUT (4 pins): DC 12 V (DC 11 V to 17 V), max. 1 A
PHONE OUT (stereo mini jack)
LENS (multi-connector, 12 pins)
EVF (multi-connector, 20 pins)
REMOTE (ECU, 6 pins)
Wireless (25 pins, D-SUB female)
Other
[CONNECTOR SECTION]
AUDIO IN CH1/CH2 (XLR k 2, 3 pins): LINE/MIC/MIC+48V switching system
MIC: –40, –50, –60 dBu menu-selectable
LINE: –6, 0, +4 dBu menu-selectable
MIC+48V: Phantom +48V supported
MIC IN (XLR, 3 pins): MIC/MIC+48V switching system
MIC: –40, –50, –60 dBu menu-selectable
MIC+48V: Phantom +48V supported (menu-selectable)
GEN LOCK IN (BNC): 1.0 V[p-p], 75 ≠
TC IN (BNC): 0.5 to 8 V[p-p], high impedance
Input
CAMERA OUT (BNC): 1.0 V[p-p], 75 ≠
VIDEO OUT (BNC): 1.0 V[p-p], 75 ≠
S-VIDEO OUT (S connector) Y signal: 1.0 V[p-p], 75 ≠
C signal: 0.286 V[p-p], 75 ≠
AUDIO OUT CH1/CH2 (RCA k 2): –6 dBu, low impedance, unbalanced
TC OUT (BNC): 2.0 V[p-p], low impedance
Output
Specifications