Philips TDA1015 - Manual (Page 8)

November 1982 8
Philips Semiconductors Product specification
1 to 4 W audio power amplifier TDA1015
Fig.6 Total harmonic distortion as a function of output power across R
L
;

with bootstrap;
− − −
without
bootstrap; f = 1 kHz; typical values. The available output power is 5% higher when measured at pin 2
(due to series resistance of C10).
Fig.7 Output power across R
L
as a function of supply voltage with bootstrap; d
tot
= 10%; typical values.
The available output power is 5% higher when measured at pin 2 (due to series resistance of C10).