Pioneer DVR-220 - Manual (Page 34)

Getting started 04
34
En
5 Recording mode
Shows the current recording mode ( FINE , SP , LP , etc.),
and the total recording time of the disc.
Note
• When using the simultaneous play and record
feature, the display shows information for playback
only.
• Data transfer rate shows the amount of video and
audio information recorded on the disc. It is not an
indication of picture/audio quality.
• The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
• The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
• Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
• The frame number is shown next to the elapsed time
display when the disc is paused.
• Copy Once or Can’t Record messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
DVR-04_UK.book 34 ページ ２００４年４月１１日 日曜日 午後５時２０分