Panasonic NV-FJ720 - Manual (Page 23)

23
Search Functions
Jet Navigator
This VCR can display a list of the recorded programmes on
the inserted video cassette on the TV screen. You can then
select the desired programme, and the VCR will quickly
locate its beginning and start playback.
Conditions for correct operation of the Jet Navigator function:
– The tape length of the inserted cassette must be set
correctly.
– The VCR must not be in the timer recording standby mode.
– A programme of at least 15 minutes must be recorded on
the tape.
Preparations
– Display the VCR picture on the TV.
– Be sure to set [JET NAVIGATOR] to [ON] (See page 13.)
and preform recording.
Operations
1
Press the NAVI button 4 to display
the Jet Navigator list.
– Up to 14 programme data that
have been recorded last are
displayed on the Jet Navigator
list.
(7 programme data for each
page)
– When more than 15 programmes have been recorded for
one cassette, the programme data are deleted from the first
one.
– When pressing NAVI button 4 during playback, playback
stops and the Jet Navigator list appears.
2 Press the NAVI button 4 several times to select the
programme that you want to locate and play back.
After more than 3 seconds, the VCR starts the search for
the beginning of the selected programme and playback
starts automatically.
– Every time you press the NAVI
button 4, the programme shifts
above.
– If, after playback has started, you
want to search for the beginning
of the same or another
programme, press the NAVI
button 4.
Playback stops and the Jet
Navigator list appears.
END : MENU
JET NAVIGATOR
CH DATE ON CATEGORY
1 1 0 / 1 8 1 0 :3 0 M U S I C
24 1 0 / 1 9 1 5 :0 0 S P O R T
5 1 0 / 2 1 2 2 :1 5
A2 1 0 / 2 3 2 0 :0 2
4 1 0 / 2 6 1 9 :1 0 E D U C A
2 1 0 / 2 7 2 0 :0 2
1 2 1 0 / 2 7 2 0 :3 0
END : MENU
JET NAVIGATOR
CH DATE ON CATEGORY
1 1 0 / 1 8 1 0 :3 0 M U S I C
24 1 0 / 1 9 1 5 :0 0 S P O R T
5 1 0 / 2 1 2 2 :1 5
A2 1 0 / 2 3 2 0 :0 2
4 1 0 / 2 6 1 9 :1 0 E D U C A
2 1 0 / 2 7 2 0 :0 2
1 2 1 0 / 2 7 2 0 :3 0
END : MENU
JET NAVIGATOR
CH DATE ON CATEGORY
1 1 0 / 1 8 1 0 :3 0 M U S I C
24 1 0 / 1 9 1 5 :0 0 S P O R T
5 1 0 / 2 1 2 2 :1 5
A2 1 0 / 2 3 2 0 :0 2
4 1 0 / 2 6 1 9 :1 0 E D U C A
2 1 0 / 2 7 2 0 :0 2
1 2 1 0 / 2 7 2 0 :3 0
END : MENU
CATEGORY SETTING
≥ MOVIE
≥ MUSIC
≥ DRAMA
≥ EDUCA
≥ DOCUM
≥ SPORT
≥ CHILD
≥ NEWS
≥ OTHER
≥– – – – –
On Screen Display
To Set the Category
The category setting allows you to find what kind of
programmes are recorded by the character and the icon
indications.
Press the Cursor button (1) S while
the Jet Navigator list appears.
Category Indication Icon
MOVIE MOVIE
MUSIC MUSIC
DRAMA DRAMA
EDUCATION EDUCA
DOCUMENTARY DOCUM
SPORTS SPORT
CHILDREN CHILD
NEWS NEWS
OTHERS OTHER
To Delete the Jet Navigator Data of a Single Video
Cassette Tape:
Keep the CANCEL button ; pressed for more than
5 seconds while the Jet Navigator list appears.
[– –] appears on the list.
– See page 13 on the way to delete all the Jet Navigator
data stored in the VCR’s memory.
Notes:
– The Jet Navigator list is stored in each cassette.
– Signals approximately 10 seconds before and after the
current tape position are checked. (During this checking,
[CHECKING JET NAVIGATOR DATA.] is displayed on the
TV screen.)
– Checking cannot be performed properly when signals are
attempted to be checked at portions of the tape where
there are no signals such as at unrecorded portions of the
tape. In this case, press the NAVI button 4 at a portion of
the tape where a programme has been recorded of this
VCR. This will allow signal checking to be performed more
reliably. When a signal can still not be found, [CAN NOT
FIND JET NAVIGATOR DATA.] is displayed on the TV and
you cannot find the beginning of the programme.
– Up to 20 cassettes and 50 programmes can be registered.
– If 50 recorded programmes data is already stored in
memory and you attempt to store timer recording data for
another programme, the message [REMAINING
PROGRAMME 0. DELETE JET NAVIGATOR DATA.]
appears. If you attempt to make a new recording, this same
message also appears after you insert the cassette and the
Jet Navigator data is checked. As each timer recording or
manual recording is finished, the programme data is
deleted, starting from the oldest data.
– When a new programme is attempted to be recorded if
programmes equivalent to 20 cassettes are already stored
in memory, [REMAINING CASSETTE 0. FOR JET
NAVIGATOR.] is displayed. Programmes recorded without
deleting data as instructed are not registered in the list.
To cancel the Jet Navigator list:
Press the MENU button U.